Xinje DS3 series servo, Manual

Page: 60 / 120

54
5. Use the operate panel
5-1. Button operation
STA/ESC
DEC INC
ENTER
power
Key Name Function
STATUS/ESC Press: Status switch, status return
INC Press: Increase the value; Press and hold: Increase the value continuously
DEC Press: Decrease the value; Press and hold: Decrease the value continuously
ENTER Press: Shift the editing digit; Press and hold: Enter a status, Enter
The operate panel can display the status, set parameter and run the command by switching the
basic mode.
The running status, auxiliary function, parameter setting, and monitoring are the basic modes.
The modes switch as the below diagram by pressing STATUS/ESC.
Status: bb indicates that the servo system is idle; Run indicates that the servo system is
running, and RST indicates that the servo needs to be powered on again.