Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
9
2.3Electrical safety Instruction
1.All circuit repairs can only be carried out by qualified personnel.
2. After the machine is stopped, the line is still energized. Disconnect all power before
servicing the machine.
3. The machine is equipped with overload protection device and the overload situation
will be displayed above the control panel, then need to unplug the power, the re-plug it;
4. The inverter is aimed at changing the speed and protecting the user and machine
safety. Do not modify, adjust the inverter and without the consent of the manufacturer modify
the inverter parameters. If the unit is defective, replace bad parts with the manufacturer's
supplied accessories (Due to changes, adjust the inverter and without the manufacturer
agree to modify the inverter parameters, resulting in other losses and the machine cannot
work properly, manufacturers do not provide warranty).
5. Absolutely cannot modify parts or lines inside the inverter.
6. Machine current overload, must pay special attention.
7. Do not connect or disconnect the wire when the outside of wire has electricity or wire
is overloaded.
8. Use of damaged power wire may cause electric shock. Do not use damaged power wire.
9. The wires should be far from the high temperature surfaces.
10. The electrical equipment should be kept dry at all times, and the machine should be kept in a dry
place;
11. After turning off the power, before the panel light does not go off, indicating that there is still high
voltage inside the inverter, it is very dangerous, do not touch the uninsulated electrical equipment parts.
12. Machine motor, inverter, must not have water (Due to water causes, resulting in other losses and
the machine cannot work properly, manufacturers do not provide warranty).
13. The machine must conform to manufacturer's specifications for the wire size and voltage (The
machine name plate shows the power supply specifications);