XINGYI HTG-550 Manual Download Page 6

 

 

 

Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.  

 

6

2

Safety instructions 

  2.1 Overview 

This manual sets out the important information for the safe operation of this machine! Must read 

carefully this manual before using this machine for the first time! 

Any non-standard operation or unauthorized modification, maintenance of the machine may cause 

the  machine  to  not  work or other losses,  and  may  be  dangerous. All work must  be done  by qualified 

personnel, and any parts for the machine must be provided by Xingyi. 

Xingyi machines can only be used in the way recommended by Xingyi. Xingyi machines can only be 

used for commercial purposes. Anyone who uses the machine should know its function, the location of 

the emergency stop, the safety rules that the operator should have to comply with when the machine 

starts, no unauthorized persons cannot be stationed at work Area. 

All  workers  should be  equipped with professional  personal  protective  equipment:  safety goggles, 

protective gloves, safety shoes, breathing masks, hearing, etc., do not wear loose clothes or anything 

can grasp things such as scarves, bracelets, rings and so on. 

Note: 

1. This machine is only used for surface grinding and polishing. 

2. Read and understand the safety instructions of the machine manual. Different models, accessories, 

control operations are different. 

3. This machine operates only for one person. When machine work, should pay attention to children 

or unrelated personnel close to the machine, to maintain a certain distance.   

4.  Without  training,  poor  physical  condition  prohibit,  the  worker  must  not  operate  the  machine. 

Operators and maintenance workers must be physically fit, able to support the weight of the machine and 

the working demands.   

5. In the absence of machine operating instructions, do not rent the machine. 

6. Body, jewelry and spacious clothes should keep away from the machine moving parts, or may 

bring physical damage. 

7. Do not arbitrarily change the machine. Can only use the parts provided by Xingyi company for 

maintenance and changes. 

8. Do not use the machine when it rains or fog; 

Summary of Contents for HTG-550



































Reviews: