2.9
Camera interface
NOTE:
It is important that the power is turned off when inserting/detaching the cable. General
precautions need to be applied.
Failing this requirement may lead to camera damage.
2.9.1
PCIe / FireFly interface
The interface connector is used for data transmission, camera control, power and IO (see section
Digital inputs / outputs (GPIO) interface
for connector pinout description).
Note:
It is important that the power is turned off when inserting/detaching the cable. Connecting camera to powered host can cause
destruction of camera. For cameras with ADPT-MX-X4G3-FF-X4G3-MTP and ADPT-MX-X4G3-FF-X4G3-SFF adapters please refer to
section
and
Item
Value
Connector
Samtec (UEC5-019-1-H-D-RA-1-A + UCC8-010-1-H-S-1-A)
Signals
PCIe 4 Gen3; Power input; Optoisolated IO
Mating Connectors
Samtec ECUE, PCUO
Figure 25: xiX-X4G3-FF connector location
This section is usable for these cameras:
MX1510CR-SY-X4G3-FF, MX1018CR-SY-X4G3-FF, MX610CR-SY-X4G3-FF, MX610MR-SY-
X4G3-FF, MX1018MR-SY-X4G3-FF and MX1510MR-SY-X4G3-FF
.
XIMEA Technical Manual, Version: v240108
33
