1.Features:
Mainly monitor and control indoor space, generally set as Motion zone.
When human body enters into etecting area, the sensor will transmit alarm signals to the alarm host.
2.Specifications:
Operating power: 9V alkaline battery
Emitting distance:
≥
100m (in open area)
Service life:
≤
1 year
Detecting distance: 110° 10×10m
3.Installation and Usage
Fix the bracket on suitable wall surface or in wall corner at a distance of 2~2.4m above the ground;
Open the sensor shell to connect the batteries well and adjust jumper line (short circuit “5S”: The sensor will
detect once every 5 seconds; short circuit “5MIN”: The sensor will detect once every 5 minutes;
S
uggestion: short circuit “5S” for testing and “5MIN” for normal use;
Fix the sensor onto the bracket;
Adjust the sensor to a proper angle and then slide the power switch on the side to “ON”, and it will enter into
the normal working state after 30 seconds;
Upon the working light flashes frequently in green, please replace the batteries.
4.How to program
Please refer to the descriptions of 3.2.13
【
Program Sensor
】
in page4.
Note:
You can only add 1 wireless wide-angle PIR sensor each time, totally 4 available to be added.
Each serial number is available to study 1 wireless wide-angle PIR sensor, the latter configured wireless
wide-angle PIR sensor will be workable and the former one becomes not workable automatically.
Wireless Indoor Siren
1. Functions Features:
1.1 Work with alarm host, wireless receiving alarm signals, spot alarming with sound and flash
1.2 With power plug, usually for indoor use.
2. Specifications:
2.1 Operating Power: 100—240VAC
2.2 Receiving Distance:≥100 M
（
In open area
）
3. Installation and Usage:
3.1 Plug the wireless siren into suitable indoor power socket
3.2 Suggestion: Generally around 1.8M from the ground
D0
D3
0 2 1
Jump Line
Learning Emitting Switch
Power Switch
Down/Off
Up/On
Low-Votage
Light
Lens
Install the bracket
Fix the PIR by pushing
it downwards
Wall
Keep the switch "on"
O
n
/ O
ff
Wall
Wall
Working Light
