9)
【
Upload status
】：
This is for uploading Arm/Disarm/Alarm information to the Managing Centre. Operations:
【
ENT + “▲▼” + ENT
】
→
“▲▼” choose “yes” or “no” for upload or not upload. The defaulted is “No”.
10)
【
Cutwire alarm?
】
:
【
ENT +
“▲▼”
+ ENT
】
→
press
▲▼
to choose yes or no, factory default is no
11)
【
Zone Attribute
】：
【
ENT +
“
”
to clean old X X + ENT
】
→
“
XX
”
：
2 digits
，
means zone number
，
Below are the
“
Zones Attribute
”
lists for wireless sensors programming for your reference:
Zone
Number
Zone
Type
Bypass
Zone
Entry
Delay
Compatible Accessories
Remark
00 ~ 01
——
No
No
Wireless Keychain remote &
Wireless Keypad
Support up to
4 sensors per zone
02 ~ 10
Emergency
zone
No
No
Wireless Smoke Alarm,
Wireless Gas Alarm& Panic button.
11 ~ 20
Perimeter
zone
No
No
Wireless Door Magnet &
Wireless Curtain PIR
21 ~ 30
Motion
zone
No
No
Wireless Wide-Angle PIR
Motion Sensor
【
Zone number
】：
Here has 31 zonesfor your settings. 29 wireless zones(Each zone supports up to 4 sensors) and 2 dedicated zones for
remotes(Supports up to 4 remotes or wireless keypads per zone). Each zone needs to setup “Zone Type”, “Bypass
Zone” & “Entry Delay”.
Zone type”
【
Zone type
】：
“
2
”
“
1
”
“
0
”
, and
“
2
”
means motion zone
；
“
1
”
means perimeter zone
；
“
0
”
means emergency
zone
；
【
sensor type
】：
normally 2 digits
Sensor
type
Sensor name
Sensor
type
Sensor name
Sensor
type
Sensor name
00
Emergency button
06
Glass sensor
12
Motion sensor
01
Emergency button
07
Motion sensor
13
Motion sensor
02
Gas sensor
08
Motion sensor
14
Other sensor
03
Smoke sensor
09
Motion sensor
15
Other sensor
04
Door sensor
10
Motion sensor
20
Doorbell button
05
Window sensor
11
Motion sensor
Below is the factory default setting for sensor type
：
Sensor name
Remote
controller
Wireless door
sensor
Wireless
motion sensor
Wireless gas
sensor
Wireless
smoke sensor
Factory
default sensor
type
00
11
21
02
03
【
sensor type
】：
factory default is no
【
Entry delay
】：
factory default is no
