2
、
If arm by SMS or remotely by phone, just follow what we write from user’s manual
3
、
If arm by remote controller or wireless keypad, please operate 2 times
Wireless door bell
：
it will sound “ding-dong” 3 times after pressing it. This only valid when you did use wireless
doorbell button
Look up alarm history: press “▲▼” to find the “Alarm history”, and then press “ENT” to look up the previous alarm history, at
most 100 pieces of history are available can be saved.
Look up status history: press “▲▼” to find the “status history, and then press “ENT” to look up the previous alarm
history, at most 100 pieces of history are available can be saved.
Alarming dialing mode: After the host goes off, it starts to repeatedly dial the auto dialer#’s for three times ne by one
from the first one. The answered number will not be dialed again.
Power disconnection: If power got disconnected, the host panel will sound “di” each 8 seconds.
(For GSM host panel and Dual network host panel only) SMS reporting: Mobile will get SMS like “ System Alarming XX,
YYYY”, “XX” means zone number, “YYYY” means the detailed sensor. Arm by SMS: You can edit SMS
“ XXXXXXBF” to host panel, the host panel would arm automatically when getting this SMS, and also will message
back to mobile “Arm successfully”. Notes: Arm by SMS is only for “Armed away”!
(For GSM host panel and Dual network host panel only) Disarm by SMS: You can edit SMS “ XXXXXXCF” to host
panel, the host panel would disarm automatically when getting this SMS, and also will message back to mobile
“Disarm successfully”.
Notes during opeartion
Alarm phone dialing
：
it will dial one group by one group, if successfully get through, won’t dial again, for the group
which didn’t get through, will dial 3 times in total .
Exit delay
：
during exit delay, alarm host panel will sound “di” each one second
；
Entry delay
：
during entry delay, alarm host panel will sound “di” each one second
AC fail
：
if AC fail
，
alarm host panel will sound “di” each 8 second
；
Cutwire alarm
：
if phone line being cut by thief, alarm host panel will sound “di di” each 8 seconds
；
Low voltage
：
alarm host panel will sound “di di di “ each 8 seconds
Connect wired sensors as below
：（
You need to connect a 2
。
2K resistance
）
1
red + s12V power input
black - GND
white zone 31 door sensor
yellow zone 32 motion sensor
blue zone 33 motion sensor
green zone 34 motion sensor
purple zone 35 motion sensor
brown zone 36 emergency button
grey zone 37 gas sensor
orange zone 38 smoke sensor
To understand accessories
Wireless Remote
1.Features:
To control the alarm host to arm and disarm.
With the emergency key for urgent help.
2.Specifications:
Operating power: 27A 12V alkaline battery
Emitting distance:
≥
100m (in open area)
Service life:
≤
2 years
3.Installation and Usage:
For users to take along.
Generally, press the “Away” key to arm before leaving home; and press the “Disarm” key to disarm; “Home”
Away
Disarm
Home
Emergency
