Virtex-II Pro Prototype Platform User Guide
www.xilinx.com
29
UG027 / PN 0402044 (v1.6) October 25, 2002
1-800-255-7778
RISCTrace Interface
R
RISCTrace Interface
The RISCTrace tool communicates with the PPC405x3 using the trace interface. It requires
a 20-pin, male 2x10 header connector (3M 3592-6002 or equivalent) located on the target
development board. The layout of the connector is shown in
Figure A-2
and the signals are
described in
Table A-3
. A mapping of PPC405x3 to RISCTrace signals is provided in
Table A-4
. At the board level, the connector should be placed as close as possible to the
processor chip to ensure signal integrity. An index at pin one and a key notch on the same
side of the connector as the index are required.
Figure A-2:
Trace-Connector Physical Layout
Table A-3:
Trace Connector Signals for RISCTrace
Pin
RISCTrace
Description
I/O
Signal Name
1
No Connect
Reserved
2
No Connect
Reserved
3
Output
TrcClk
Trace cycle.
4
No Connect
Reserved
5
No Connect
Reserved
6
No Connect
Reserved
7
No Connect
Reserved
8
No Connect
Reserved
9
No Connect
Reserved
10
No Connect
Reserved
11
No Connect
Reserved
12
Output
TS1O
Execution status.
UG018_51_100901
19
20
1
2
0.1"
0.1"
Key Notch
Index
