0.00
the upper limit frequency F0.11
～
0.0
.5s
～
6553
0.0
.5s
～
6553
0.0
6553.5s
～
0.0
6553.5s
～
0.0
6553.5s
～
0.0
6553.5s
～
0.0
6553.5s
～
When the setup frequency is within the
skip frequency ,
the actual running frequency will be in the skip frequency boundary
close to the setup frequency .
range of
It can make the inverter run away from the mechanical resonance
point of the load through setting the skip frequency .
0.0
6553.5s
～
It is used to define the reference frequency and acceleration/
deceleration time of the inverter during Jog .
The Jog process starts and stops according to the start
mode 0 (F5.00=0 , start from start frequency )and the stop
mode 0 (F5.05=0 ,deceleration time to stop ).
The Jog acceleration time means the time required for the
inverter to accelerate from 0Hz to the maximum output
frequency (F0.11).
The Jog deceleration time means the time required for the
inverter to decelerate from the maximum output frequency
(F0.11) to 0Hz .
Group F7
Auxiliary Function
Acceleration/deceleration time can select F0.13 and F0.14
and the above three types of acceleration/deceleration time .
Their meanings are the same .
It can select acceleration/deceleration time 1 to 4 during the
inverter running process through the different combination of
multifunctional digital input terminal X . Please refer to the
description of Group F3 (Input Terminal).
The above acceleration/deceleration time can also be used to
satisfy locale need under the mode of PLC running .
0.0Hz
the maximum frequency F0.11
～
0.0Hz
the maximum frequency F0.11
～
If the two skip frequency are set as zero , this function will be
disabled .
57
F7.02
F7.01
F7.00
5.00Hz
20.0s
20.0s
F7.04
F7.05
F7.06
F7.07
F7.08
F7.09
20.0s
20.0s
20.0s
20.0s
20.0s
20.0s
F7.10
F7.11
0.00Hz
0.00Hz
F7.03
0
0 actived
1 disabled
Chapter 6 Parameter Description
0
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Factory
default value
Copy keyboard
function selection
F6.09
Please refer to the copy keyboard description of our
company .
Setup range
Setup range
Setup range
Setup range
Setup range
Setup range
Setup range
Setup range
Setup range
Setup range
Setup range
Setup range
Jog running frequency
Jog acceleration time
Jog deceleration time
It can avoid jog command for error operation by setting
it to 1 during the
inverter .
running process of
Jog action selection
on running status
Acceleration time 2
Deceleration time 2
Acceleration time 3
Deceleration time 3
Acceleration time 4
Deceleration time 4
Skip frequency
Skip frequency
amplitude
Skip frequency amplitude
Skip frequency amplitude
Frequency setting signal
Fig.6-14 Schematic Diagram of Skip Frequency
Skip
frequency
Adjusted
setting
frequency
