within the range of -10
to 50
.
℃
℃
enough because the inverter will generate lots of heat during running , besides mount the inverter vertically on
the base with screws .
13
Chapter 3 Mechanical and Electrical Installation
Chapter 3 Mechanical and Electrical Installation
3.1 Mechanical Installation
1、Insatallation Environment
2、Insatallation Location
Insatallation of single inverter
Up and down insatallation of inverter
Install an airflow-guidance plate for
Note :
When the inverter power is not
Note :
higher than 22kw ,the
A
size can be
“ ”
omitted . When the inverter power is
higher than 22kw, the
A
size should
“
”
be higher than 50mm .
Fig . 3-1
the up and down installation of inverters .
1) Ambient temperature : ambient temperature influences the life of inverters greatly , so it
should be
2) Mount the inverter in a flame retardant surface and the clearance around the inverter should be
3) Mount in the location where vibration is less than 0.6G;the inverter should be far away from
4) Please do not install the inverter in the place with direct sunlight,high humidity and water .
5) Mount the inverter in the location free of corrosive gas ,explosive gas of combustible gas .
6) Mount the inverter in the location free of oil dirt , dust , and metal powder .
impacting lathe .
≥
100mm
EH600
A
A
EH600
EH600
≥
100mm
