Xilin CDDR, Operation Manual, Page: 15 / 60

11
Abrupt turning during traveling may cause the tilting of truck and result in serious
accident. Do decelerate and take care to turn.
Notice
Observe all items of safety rules on working place. Decelerate and sound horn
when travel by other truck or vehicles. Avoid driving in places with bad view.
Notice
Ensure to provide certain clearance between truck and entrance.
（
3
）
Never drive too close to roadside:
Notice
Ensure to provide enough distance between the truck and roadside or platform
edge.
When running on narrow road or platform, keep a certain safety distance with the edge against falling
of the truck.
Warning
Avoid turning or loading and unloading operation on slope;
otherwise the truck can go tilting.
3
． ． ． ．
3 Operation norms:
Notice
The truck can only carry goods under rated capacity.
1) Forbid overloading operation.
2) Forbid deflective transportation.
3) Passengers on truck must be forbidden.
4) Never push or pull the handle abruptly
5) Never use the truck as towing vehicle.
6) When transporting over-wide goods, the driver shall be extremely careful to turn slowly to keep
balance of the goods. Decelerate when ascent and descent, meanwhile, watch around for sake of
safety.
7) The faulty truck for future repair must not be parked at places impeditive for traffic. Lower down the
fork arms to the lowest position and put on the warning board. Pull off the key.
8) When protective devices suck as protective cover of mast is not mounted, it is forbidden to operate
the truck.
9) Take care to avoid the danger of wind force when loading goods.
Notice
Take care to avoid the danger of wind force when loading goods.