Xilin CDDR, Operation Manual, Page: 12 / 60

8
⑵
Wear of the driver during truck driving:
Notice
Please put on safety shoes and protective clothes. Do not wear clothes that are too loose
for sake of being caught, which would result in danger.
⑶
Rules that must be observed:
Notice
Never drive the truck when you are tired or un-concentrated, with an injection of drug, or
after a liquor drinking.
Safety rules and regulations shall be observed during operation or maintenance of the truck.
⑷
Safety of working place:
Notice
This kind of electric stacker is only limited to utilization indoor with a hard flat floor.
Operation in inflammable, explosive environment or corrosive environment such as acid or alkaline
condition shall be strictly forbidden.
a. Good roadway condition shall be kept and the traffic should be smooth.
b. Sufficient light ray shall be ensured on working place.
c. Fire extinguishing appliances shall be equipped in the places where truck and charging is operated.
The extinguishing appliances shall comply with the requirements of extinguishing fire of solid
combustible matter and electric apparatus.
d. The value of truck noise mentioned in instruction is measured under the condition of new truck
running on flat, smooth and hard ground. If the traffic surface is bad or the tyre of truck is
damaged, the noise may be amplified.
⑸
Integrity of the truck shall be realized:
Warning
Do not make modifications on the truck.
A Please observe safety rules and regulations of your working place during operation,
inspection, and maintenance of the truck.
- Unauthorized truck modification is not permitted.
-
No modifications or alterations to a powered industrial truck, which may affect, for example,
capacity, stability or safety requirements of the truck, shall be made without the prior written
approval of the original truck manufacturer, its authorized representative, or a successor
thereof. This includes changes affecting, for example braking, steering, visibility and the
addition of removable attachments. When the manufacturer or its successor approve a
modification or alteration, they shall also make and approve appropriate changes to capacity