NeuPanel-Mini Series
Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Page | 16
19.
Switch to Online Mode:
(Transfer/Saving Work to the Physical Devices)
Once your Mini Wall Control programming (and DSP design project) are completed and saved to
your PC - you can
Transfer/Save
your work to the connected physical devices
.
Note: Only then will the Mini wall control (and processor) be active and able to control the
processor/software as programmed
.
To do this,
Select the red
“
Switch to Online Mode
”
button at the top of the Project View / Design Mode
work area page as shown below.
This button selection actually performs two functions at the same time
– it transfers or saves
your Mini programming (and DSP design) to the connected physical Mini control device (and
processor) plus the Mini control device (and associated processor) are now Online and
active/ live.
Once the red
“Switch to Online Mode”
button is selected
– information windows will ask
you for permissions (as shown below) as a safety factor before proceeding to save your work
to the physical devices.
Read and answer all permission window questions carefully before proceeding
.
Once you give permission the
Online Mode - Transfer/Saving
procedure will begin - with an
hour glass symbol and a “
Preparing Devices
–
Please Wait
” message as shown below.