Xilica Audio Design Mini Series, Quick Start Manual, Page: 14 / 18

NeuPanel-Mini Series Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Page | 14

Now double click on the first DSP module whose parameter function you want to control
with the Mini-S4K1 wall control to open up that DSP module. We opened the Input DSP
module as shown below left (& at right).

Place your cursor at the top left corner of
the parameter function
you want to program
into the Mini control; Correct starting position
will turn the cursor into an + symbol; Click, hold,
and highlight in Yellow to Capture the entire
parameter function (as shown at right); Release
once highlighted; Once highlighted properly the
parameter function will change colour and have
an orange highlight line around it.

In our example below we have highlighted and released to capture
Input #1’s Fader
Level parameter function on the left side of the screen shot.

Next, drag and drop the highlighted Fader Level parameter function onto the level
control of the Mini S4K1 wall control in the work area and release it there. Once released the
Level control on the Mini device will turn light red and is highlighted with an orange line
around it to indicate that it has been programmed - as shown below.
N
o