XOver
-
Crossover parameters
•
FTRL - Filter Type of low frequency crossover point (high pass).
Types can be Butterworth, Linkritz Riley or Bessel.
O1:XXXXXX XOver
FTRL:Off
•
FRQL - Filter cut-off Frequency of low frequency crossover point
(high pass). Ranges from 20 to 20,000Hz in either 1Hz steps or
1/36 octave steps. The frequency steps can be selected in the
System Menu
.
O1:XXXXXX XOver
FRQL:1000Hz
•
SLPL - Filter Slope of low frequency crossover point (high pass).
Ranges from 6 to 48dB/octave. If the selected Filter Type is
Linkritz Riley, the available slopes are 12 / 24 / 36 / 48 dB/octave.
O1:XXXXXX XOver
SLPL:24dB
•
FTRH - Filter Type of high frequency crossover point (low pass).
O1:XXXXXX XOver
FTRH:Off
•
FRQH - Filter cut-off Frequency of high frequency crossover point
(low pass).
O1:XXXXXX XOver
FRQH:1000Hz
•
SLPH - Filter Slope of high frequency crossover point (low pass).
O1:XXXXXX XOver
SLPH:24dB
DCP-3060 User's manual - Page 14
