Xiaomi W2 Operating Manual Download Page 5

Safety precautions

Please read the manual before use

Warning: In order to avoid injury and unnecessary property loss to you and others, please read carefully and follow the following "safety 

precautions" before use. This section describes security precautions in two aspects: Warning and Caution. "Warning" and "Caution" are 

important contents for safe use and must be observed.

Precautions for the risk of death or serious injury due to improper operation

Warning

Attention This section describes the precautions that may cause minor injury or damage to the product

Warning (Main machine)

�. Do not use this product in wet places such as water  or nearby bathroom;

�. Do not use it to clean liquids, matches and wet garbage;

�. Do not use the unit to clean kerosene, gasoline and other flammable liquids, objects with Mars, toner and other flammable dust, or 
use the unit near the above items and flammable and explosive gas to prevent it from fire;

�. Except for the replacement of consumables according to this manual, do not disassemble, repair or transform by yourself, in order 
to avoid fire, injury or poor operation;

�. If main brush is found  not good working during use, please turn off the switch button and immediately check whether the rolling brush 
is wrapped with hair or other excessively long fibers and clean it in time;

�. The battery is a sealed device, and there is no potential safety hazard under normal conditions. If the liquid flows out of the battery 
under extreme conditions, it may cause irritation or burns.In case of eye contact, flush immediately under running water for at least �� 
minutes and seek medical help immediately;

�. The device is not suitable for children or people with poor physical, sensory and mental health and lack of experience and knowledge. 
Please use it under supervision;

�. Please keep the sweeping robot away from the electromagnetic equipment of the hospital; Supervise children not to play with the 
product; The sweep and tow robot can only be used with the provided cleaning base station;

�. The battery must be removed from the machine before it is abandoned;When removing the battery, the machine must be powered 
off;Remove the screws from the bottom cover, open the bottom cover, and remove the battery connection terminals. Remove the 
battery from the battery box. Recycle the used battery pack;

��. It is recommended to charge it once a month if it is not used for a long time.

Warning (Cleaning base Station)

�. Do not pull and insert the plug with wet hands;

�. Do not use damaged power plugs or loose sockets;

�. When cleaning the base station, please use the rated voltage AC power supply, do not use the generator or DC power supply, etc., to 
avoid fire and electric shock;

Summary of Contents for W2























Reviews: