Standby
Dust bag is full
Hot air failure
Sewage pump
failure
Drying mop
Dust collection
Immersion heater
failure
charging state
Pour the sewage
Blower failure
Clean water pump
failure
Clean water tank is
not installed
Dust bag is not
installed
Cleaning plate is
not installed
Sewage tank is
not installed
Adding water
The mop is not
in place
Cleaning mop
The host is not on
the base station
Cleaning plate
is clogged
Networking ��
Networking ��
The signal
disconnects
Upgrade
Update completed
Description of Multi-functional cleaning base station display
�
Power on the cleaning base , the display screen is steady on, if there is no operations with the base or �� seconds, and the screen goes off.
* Tip: Finger touch button to start
Function button
Led display
Start/pause
Start/pause
Recall
Recall
Mop-cleaning
Mop cleaning
Automatic dust
collection
Automatic
dust collection
Start: Execute the task. Pause: Suspend the task;
Sweep and mop / single mop: when robot is in the base station, short press to maintain the current charging state;When it is
not in the base station, short press the short button to recall it to the base station, collect dust (more than � minute), clean the
mop, dry and charge;Single sweep: when robot is in the base station, press to maintain the current charging state;When robot is
not in the base station, press to recall it to the base station, dust collection (more than � minute), charge;
Sweep and single mop: when robot is in the base station, short press cleaning mop, drying, charging;When robot is not in the base
station, short press to display that robot is not on the base station.Single sweep: when robot is in the base station, short press has
no effect;When robot is not in the base station, the short press has no effect and the robot is not in the base station.
Short press to dust collecting for �� seconds
Summary of Contents for W2
Page 2: ......
