Product disassembly and cleaning
Please carry out the following cleaning steps in the case of power off!
Disassembly and installation of main brush assembly
Step �: Main brush disassembly
Turn over the machine, hold the release button of the roller brush box and move
to the center respectively, remove the outer cover of the main body;Remove the
main brush, clean the surface attachment.
Step �: Main Brush cleaning
Use a cleaning brush to lift and cut off the hair and fiber material attached
to the main brush, and separate it from brush. It is recommended to
replace the main brush every �-� months.
Side brush disassembly and install
Step �: Remove the side brush
Turn over the machine, unscrew the screw with a screwdriver, and remove
the side brush.
Step �: Side brush cleaning
Use clean brush to brush on the side of the attached hair and fiber
material to stir up and cut off, so that it and the side of the brush from;It is
recommended to replace the side brush every �-� months to ensure the
cleaning effect.
��
Main brush release button
Summary of Contents for W2
Page 2: ......
