32
Troubleshooting
Problem
Solution
Slow inflation speed
1. Check whether the air compressor's
battery level is sufficient.
2. Check whether the air hose is leaking.
3. Check whether both ends of the air
hose are securely connected.
4. Check whether the item that is being
inflated is leaking.
Air compressor turns on
but does not inflate
1. Check whether the air hose is removed
from its compartment before inflating.
2. Check whether the air compressor's
battery level is sufficient.
3. Check whether the pressure of the
item that is being inflated exceeds the
preset pressure.
Unable to increase or
decrease the preset
pressure
Make sure the air compressor is set to
the correct mode. It is allowed to adjust
the preset value in the range of 3–150 psi
in manual mode.
Air compressor inflates
normally but the displayed
pressure is zero
The pressure of low-pressure inflatables
including balloons is too low to measure.
Air compressor already
turned off after connecting
the air hose to a valve
Press and hold the start/stop button to
turn the air compressor on again.
Air leaks out when
connecting the air hose
Make sure the air hose is securely
connected.
Color of the battery level
indicator is different when
inflating compared to
standby state
The lithium battery's voltage level drops
when discharging power, causing the
battery level indicator to have a different
color when inflating compared to
standby state. This is normal.
The indicator does not
light up after charging
Replace the adapter with safe and
compliant ones, and charge again.