07
Blender Assembly (Blender Blade + Blender Blade Base)
Remove the blender assembly before cleaning the blender assembly and the pot, then install them back correctly a
er
cleaning and drying for future use. The blender blade is used for blending, cu
ing, and mixing food, therefore, it must always be
properly installed and fully locked with the blender blade base; otherwise, an accidental injury may occur. Please follow the
steps below:
1. To avoid the blender blade falling o
accidentally,
hold the handle of the pot with its mouth facing
upwards.
2. Rotate the blender blade base clockwise to remove
it, and temporarily leave the blender blade in the
pot.
3. Carefully li
the handle of the blender blade to
remove it from the pot, along with the rubber seal.
4. When cleaning the blender blade, special care must
be exercised to avoid being cut. Wipe dry a
er
cleaning.
5. Hold the handle of the blender blade along with the
rubber seal, align the blender blade with the
opening on the bo
om of the pot, and put the
blender blade into it till the rubber seal is in contact
with the bo
om of the pot.
6. Install the blender blade base onto the bo
om of
the pot from below, then rotate it counterclockwise
till the blender blade and the blender blade base are
rmly locked together.
· The blades are extremely sharp. Take extra care
when installing, disassembling, using, or cleaning
them.
· Do not touch the blades. Doing so may result in
injury.
· When disassembling the blender blade, ensure that
the pot mouth is facing upwards. Otherwise, the
blender blade may fall o
and cause personal injury
or deforming the blades.
· Do not place hands into the pot before removing it
from the cooking base.
· To avoid burns by residual heat from cooking, make
sure that the pot and the blender blade are cool
enough to touch before removing them.
· Make sure that the blender blade is correctly
installed. Check the blender blade and the rubber
seal regularly.
· When installing the blender blade, make sure that
the blender blade and the rubber seal are
t in place.
· Make sure that the rubber seal is intact. Otherwise,
the product may be damaged because of the liquid
leaking into the cooking base.
· Make sure that the blender blade is correctly
installed and completely locked before cooking.
CAUTIONS
Rotate clockwise to open
the blender blade base.
Blender Blade
Blender Blade Base
Blade Handle
Rubber Seal
Blender Blade
Summary of Contents for MI MCC01M-1A
Page 2: ......
