AM100 Series User Guide
www.milesight-iot.com
8
Show CO
2
history tendency from 0 to
1400ppm.
2 min
Show alarm when CO
2
exceeds the threshold
value.(1200 ppm by default)
Note:
AM100 series will do a full-screen refresh every 30 minutes in order to remove
ghosting.
Please refer
for TVOC and CO
2
threshold settings.
AM100 series shows current value on the screen and uplink the average value of the
reporting interval to the gateway.
2.3.2 Screen Mode Switch
Here are 3 methods to switch between the three modes:
Power button: Quick press on the power button to switch the mode.
Mobile APP: Go to APP menu “Device > Settings > Basic Settings” to select screen
display mode.
Software: Go to Toolbox menu “Device Settings > Basic > Basic Settings” to select
screen display mode.
2.3 Power Button
AM100 series can be turned on/off or reset by power button on the rear panel.
Function
Action
Turn On
Press and hold the power button for more than 3 seconds until
the screen changes state.
Turn Off
Press and hold the power button for more than 3 seconds until
the screen changes state.
Reset
Press and hold the power button for more than 10 seconds.
Note:
AM100 series will be automatically power on after reset.
Change Screen Mode
Quick press on the power button.
