AM100 Series User Guide
www.milesight-iot.com
2
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not
following the instructions of this operating guide.
The device must not be disassembled or remodeled in any way.
Do not place the device outdoors where the temperature is below/above operating
range. Do not place the device close to objects with naked flames, heat source (oven or
sunlight), cold source, liquid and extreme temperature changes.
The device is not intended to be used as a reference sensor, and Milesight will not
should responsibility for any damage which may result from inaccurate readings.
The battery should be removed from the device if it is not to be used for an extended
period. Otherwise, the battery might leak and damage the device. Never leave a
discharged battery in the battery compartment.
The device must never be subjected to shocks or impacts.
Do not clean the device with detergents or solvents such as benzene or alcohol. To
clean the device, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe
dry.
Declaration of Conformity
AM100 series is in conformity with the essential requirements and other relevant provisions
of the CE, FCC, and RoHS.
© 2011-2021 Xiamen Milesight IoT Co., Ltd.
All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or
individual shall copy or reproduce the whole or part of this user guide by any means without
written authorization from Xiamen Milesight IoT Co., Ltd.
For assistance, please contact
Milesight technical support:
Email: [email protected]
Tel: 86-592-5085280
Fax: 86-592-5023065
