AM100 Series User Guide
www.milesight-iot.com
10
4. Basic Configuration
AM100 series sensor can be monitored and configured through one of the following
methods:
Mobile APP (NFC);
Windows software (NFC or Type-C port).
In order to protect the security of sensor, password validation is required when first
configuration. Default password is
123456
.
4.1 Configuration via Smartphone APP
Preparation:
Smartphone (NFC supported)
Toolbox APP: APP can be download on Google Play or Apple Store.
4.1.1 Read/Write Configuration via NFC
1. Enable NFC on the smartphone and open “Toolbox” APP.
2. Attach the smartphone with NFC area to the device to read basic information.
Note:
Ensure your smartphone NFC area and it is recommended to take off phone case
before using NFC.
3. Click “Write” to change the configuration of AM sensor and attach the smartphone with
NFC area to the device until the APP shows a successful prompt.
Note:
If you use a new smartphone to configure the sensor at the first time, it’s necessary
to enter the password. (Default password: 123456)
