TUTA-B1 GSM REMOTE CAMERA USER MANUAL
11
any suitable horizontal surface.
How to choose the Installing place:
In order to capture better image quality, avoid any areas where bright light will
be irradiated directly into the lens of the camera on the camera.
In order to avoid backlighting photography, it is suggested that the camera is
located at the place where can look down the monitoring place with the
minimum angel 30
°
.
The GSM network
’
s signal strength may affect the image, live voice quality
and MMS transmission speed. Therefore, upon installation, the user should
ensure that TUTA camera is located in an area with a strong network signal.
After installation, the user should perform a test-run by taking several images
and sending it to the user
’
s mobile phone. This allows the user to check the
image quality of the camera. The position of TUTA camera can then be
adjusted until a satisfactory image quality level is reached.
2.5 Power on/ off
Power on:
Operation
Indicator light
Status
Turn the power
switch to
“
On
”
position.
Red light is on for 3-5 seconds.
Red light flashing slowly for about
35 seconds.
A
“
Beep
…”
tone will be heard.
Green light flash slowly, or
green light be on constantly.
TUTA camera is
disarmed, or armed.
Power off:
Turn the power switch to downside
“
Off
”
position.
Chapter 3 Define the user
3.1 User authorization level
There are three levels, each with a different authorization level, namely
Master
,
Families
and
Guest
.
Table 3.1 the difference in authority for Master, Families and Guests users:
User Type
Functions
Master
Families
Guests
