TUTA-B1 GSM REMOTE CAMERA USER MANUAL
13
•
The
“
#
”
symbol must not be ignored when typing an SMS command.
•
No allow any space within the commands.
3.2 Define master user to start the camera
In order to enable all the functions on the camera, the
Master
user must store his/ her
mobile number in the camera
’
s memory. Only one
Master
’
s mobile number (
Master
number) is allowed for a camera.
3.2.1 Add a master number to the camera
Authority:
Master
user.
&
Description
If TUTA camera is being used for the first time, or TUTA camera has been reset,
the master user
’
s number must be programmed into the camera, in order to
ensure activation. The following methods can be used:
Ì
Method
The user must edit and send the following SMS to camera via his/her mobile
phone (the phone number will be the
Master
number) in order to:
Add a master number to the camera
: #00#+
CountryCodeSIMNumber
#
(1)
•
The
CountryCodeSIMNumber
should be the SIM card number which be
inserted into TUTA camera. The +
CountryCode
means the access code for
country calling. For example:
In Germany, if the SIM number inside the TUTA camera is 01712345678, then
this command should be #00#+491712345678# (+49 is the country code of
Germany, 1712345678 is SIM number with no trunk prefix 0).
J
Successful SMS reply
Welcome to the GSM Remote Camera. Your password is 1234.
L
Failed SMS reply
If a user tries to activate TUTA camera again, TUTA camera will send a
notification via SMS stating
“
Master user already exists.
”
3.2.2 Change the master number
Authority:
Master
user