TUTA-B1 GSM REMOTE CAMERA USER MANUAL
23
4.5 Remote control
4.5.1 Add remote control(s) to the camera
&
Description
When a remote control is added to one camera, it can control the camera. A
camera can be added up to 5 remote controls.
Ì
Method
Indicator
Operations
Status
Green, flashing or
constantly light.
1. Press and hold the
Set
key
for 2 seconds
Indicator light turns to orange
(Learning mode)
Orange, flashing
2. Press any button on the
remote control (with battery
inside) to send a signal to
TUTA camera.
TUTA camera will emit a
“
Beep
”
tone and indicator will turn green
for 2S. (Added successfully.)
Orange, flashing
3. Repeat step2 to load
another new remote camera.
Orange, flashing
4. Press the
Set
key to exit
the learning mode or waiting
for 15 seconds to auto-exit.
Indicator
light
turns
green,
flashing or constantly light. (Exit
learning mode)
%
Note
During the process of learning new remote control, if the battery of remote control
runs out, TUTA camera will emit three
“
Beep
…”
tones and exit learning mode. You
need to replace the battery and try learning process again.
4.5.2 Remote control instruction
There are three buttons on the remote control:
A.
Arm TUTA camera
•
When
is pressed, the indicator light on TUTA camera will turn green. This
indicates that TUTA camera is in armed mode.
•
Any motion detected by TUTA camera as well as any activation of added
wireless detector will trigger the camera alarm and a SMS/MMS or phone
calling notification will be sent to the preset numbers.
B.
Disarm TUTA camera
