background image

                                                                                            LPG4 User Manual 

Rev. 1.3 

 

2

 

 

 IMPORTANT SAFETY INSTRUCTIONS 

 
Before  using  the  appliance,  please  carefully  read  the  following  safety  regulations  in  order  to 
prevent any hazard or material damage. 
 

1.Safety Precautions 

 
1)

 

Be  sure  to  use  the  accompanying  power  charger,  if  not,  it  may  cause  fire,  explosion  or 
damage. 

2)

 

Wipe your hand if it is wet before you insert into or remove from the socket. 

3)

 

Do not drag the connecting cable for unpluging from the socket, it may damage the cable or 
printer may out of order. 

 

2. Operation Precautions 

 
1)

 

Water  or  other  liquid  should  not  be  spilled  into  the  printer,  the  printer  also  should  not 
expose to the rain, or else may damage printer. 

2)

 

Please  do not open  the  printer  cover  when  it  is printing,  otherwise  the printer  may  work 
improperly. 

3)

 

If printing with serial interface, do not unplug the interface cable, or else some printing data  

may lost. 

4)

 

Too  high(45

or  too  low(5

temperature  and  too  high(85%)  or  too  low(20%)  relative 

humidity both affect the print quality. 

5)

 

The print paper in poor quality or stored for too long time may also reduce the print quality, 
even damage the printer. 

 

3. Storage Precautions 

 
1)

 

The printer should be placed in such an environment that the temperature ranges from  

-40

 to 60

, and the relative humidity is between 5% and 95%. 

2)

 

Normal  thermal  paper  can’t  be  kept  for  long,  if  you  need  to  keep  the  receipt  for  a  long 
period, please choose long term effective thermal paper. 

3)

 

The  print  paper  should  be  keep  away  from  high  temperature  environment  and  direct 
sunshine. 

 

4. Other Precautions 

 
This manual has been prepared with utmost care and attention to detail but may contain certain 
errors and/or omissions. HPRT is not legally liable for any damages resulting from the use of this 
manual information. HPRT and its affiliates are not legally liable (United States excluded) for any 
damages,  loss,  costs,  and/or  expenses  that  result  from  the  breakdown,  malfunction,  and/or 
misuse of the product due to violation or neglect of the operation and maintenance information 
and  instructions  provided  by  the  our  company,  as  well  as  from  the  unauthorized  alteration, 
repair,  and/or  modification  of  the  product  by  the  user  and/or  third  party.  HPRT  is  not  legally 
liable for any damages and/or issues resulting from the use of options and/or parts that are not 
our authentic or authorized products. 

Summary of Contents for LPG4















































Reviews: