VVDI – MB TOOL User Manual
19
2021-06-01
Ver: 2.1
5.2.
Functions
1.
Mode
: Support OBD and IR adaptor read EIS. You need to connect OBD line to the
car in OBD mode or the EIS, IR mode only need IR adaptor. In addition, support no
gateway mode to read W164, W209 and W211 EIS via OBD (need an extra adaptor
which need to be purchased separately).
2.
Chassis:
EIS type,
support auto detect CAN protocol EIS under OBD mode, K
line need to be manually selected.
3.
Allow user:
When you select this option, allow input key information, password, VIN
manually
4.
Read EIS data
: Read basic information and key information from EIS.
Attention:
You can read password via IR directly, select IR mode, EIS is old Motorola type
HC05, HC08 (K-Line)and so on
，
can be used for k line EIS model, support add
key or lost all key, support some types of W209 and W211 EIS to read the
password directly via OBD.
5.
Save EIS data
: Save the EIS data you have read. The data will be saved in two
formats: VVDI-MB type and HC05 type.
6.
Load EIS data/Motorola EEPROM dump
: Load VVDI-MB type EIS data (Support
to load the Motorola EEPROM type file).
7.
Write EIS data
: First you should read EIS or load EIS data. Second, write EIS data to
new EIS. This function can use to replace EIS. Attention: Only support under IR mode,
but you must make sure the OBD line has already connected to the EIS.
8.
Renew EIS
: Input the correct key password and erase password, renew 2
nd
hand
EIS to a new one. Attention: Only support under IR mode.
9.
Clear TP
: This function can clear transportation protection which is only works for the
new EIS. Once the EIS activated, this option will be always selected even renew EIS.
The EIS without transport protection closed
doesn‟t support write data.
10.
Disable Key
: This function can disable the car key.