PCIe
Slot
CPU
PCIe
Standa
rds
Connec
tor
Width
Bus
Width
Port
No.
B/D/F
Slot
Size
● The B/D/F (Bus/Device/Function Number) values are the default values when
the server is fully configured with PCIe devices. The values may vary if the
server is not fully configured with PCIe devices or if a PCIe card with a PCI
bridge is configured.
● The PCIe x16 slots are backward compatible with PCIe x8, PCIe x4, and PCIe
x1 cards. The PCIe cards are not forward compatible. That is, the PCIe slot
width cannot be smaller than the PCIe card link width.
● The full-height half-length (FHHL) PCIe slots are backward compatible with half-
height half-length (HHHL) PCIe cards.
● All slots support PCIe cards of up to 75 W. The power of a PCIe card varies
depending on its model.
5.8 PSUs
●
The server supports one or two PSUs.
●
The server supports AC or DC PSUs.
●
The PSUs are hot-swappable.
●
The server supports two PSUs in 1+1 redundancy.
●
The same model of PSUs must be used in a server.
●
The PSUs are protected against short circuit. Double-pole fuse is provided for
the PSUs with dual input live wires.
●
If the DC power supply is used, purchase the DC power supply that meets the
requirements of the safety standards or the DC power supply that has passed
the CCC certification.
●
Contact your local sales representative or use the
determine the components to be used.
NO TE
When one or two 1500 W AC Platinum PSUs are configured, When the input voltage ranges
from 100 V AC to 127 V AC, the output power decreases to 1000 W.
Figure 5-27
PSU positions
FusionServer 2488 V5 Server
Technical White Paper
5 Hardware Description
Issue 06 (2023-12-12)
Copyright © xFusion Digital Technologies Co., Ltd.
37
