xFusion Digital Technologies FusionServer 2288H V7 Manual Download

Page: 20 / 173

Indicator and Button Description

Table 5-1

Indicators and buttons on the front panel

Silkscreen

Indicator/
Button

Description

Fault
diagnosis LED

● ---: The device is operating properly.
● Error code: A component is faulty.

For details about error codes, see the

FusionServer Rack Server iBMC Alarm
Handling

Health status
indicator

● Off: The device is powered off or faulty.
● Blinking red at 1 Hz: A major alarm has been

generated on the system.

● Blinking red at 5 Hz: A critical alarm has been

generated on the system.

● Steady green: The device is operating

properly.

FlexIO card
presence
indicator

Indicates whether the FlexIO card is detected.
● Off: The FlexIO card is not detected.
● Blinking green at 0.5 Hz: The FlexIO card is

detected but is not powered on.

● Blinking green at 2 Hz: The FlexIO card is

detected and has just been inserted.

● Steady green: The FlexIO card is detected

and the power supply is normal.

FusionServer 2288H V7 Server
Technical White Paper

5 Hardware Description

Issue 02 (2023-05-25)

Summary of Contents for FusionServer 2288H V7














































































































































































Search results

Summary of Contents for FusionServer 2288H V7

Reviews:

Related manuals for FusionServer 2288H V7

Brands by name

Popular brands

xFusion Digital Technologies FusionServer 2288H V7, Manual

Search results

Summary of Contents for FusionServer 2288H V7

Reviews:

Related manuals for FusionServer 2288H V7

Brands by name

Popular brands