xFusion Digital Technologies FusionServer 2288H V7 Page 83 Manual Download

Page: 83 / 173

5.5.2 Drive Indicators

SAS/SATA Drive Indicators

Figure 5-50

SAS/SATA drive indicators

Table 5-36

SAS/SATA drive indicator description

Activity Indicator
(Green)

Fault Indicator
(Red/Blue)

Description

Off

The drive is not detected.

Steady on

Off

The drive is detected.

Blinking at 4 Hz

Off

Data is being read or written properly, or
data on the primary drive is being
rebuilt.

Steady on

Blinking blue at 4
Hz

The drive is being located.

Blinking at 1 Hz

Blinking red at 1
Hz synchronously

Data on the secondary drive is being
rebuilt.

Off

Red steady on

A drive in a RAID array is removed.

Steady on

Red steady on

The drive is faulty.

FusionServer 2288H V7 Server
Technical White Paper

5 Hardware Description

Issue 02 (2023-05-25)

Summary of Contents for FusionServer 2288H V7














































































































































































Search results

Summary of Contents for FusionServer 2288H V7

Reviews:

Related manuals for FusionServer 2288H V7

Brands by name

Popular brands

xFusion Digital Technologies FusionServer 2288H V7, Manual

Search results

Summary of Contents for FusionServer 2288H V7

Reviews:

Related manuals for FusionServer 2288H V7

Brands by name

Popular brands