xFusion Digital Technologies FusionServer 2288 V5 Manual Download Page 59 | Manualshive

Page: 59 / 86

background image

FusionServer 2288 V5 Server
Technical White Paper

8 Safety Instructions

2022-11-11

59

8

Safety Instructions

8.2 Maintenance and Warranty

8.1 Security

General Statement

⚫

Comply with local laws and regulations when installing devices. These Safety
Instructions are only a supplement.

⚫

The "DANGER", "WARNING", and "CAUTION" information in this document does
not represent all the safety instructions, but supplements to the safety instructions.

⚫

Observe all safety instructions provided on the device labels when installing hardware.
Follow them in conjunction with these Safety Instructions.

⚫

Only qualified personnel are allowed to perform special tasks, such as performing
high-voltage operations and driving a forklift.

If this device works in a residential environment, the wireless interference may be generated.

Human Safety

⚫

This equipment is not suitable for use in places where children may be present.

⚫

Only certified or authorized personnel are allowed to install the device.

⚫

Discontinue any dangerous operations and take protective measures. Report anything
that could cause personal injury or device damage to a project supervisor.

⚫

Do not move devices or install racks and power cables in hazardous weather conditions.

⚫

Do not carry the weight that is over the maximum load per person allowed by local laws
or regulations. Before moving or installing equipment, check the maximum equipment
weight and arrange required personnel.

⚫

Wear clean protective gloves, ESD clothing, a protective hat, and protective shoes, as
shown in Figure 8-1.

«
...
57
58
59
60
61
...
»

Summary of Contents for FusionServer 2288 V5























































































Reviews:

No comments

Related manuals for FusionServer 2288 V5

SuperServer E100-8Q

Brand: Supermicro Pages: 48

301160U - 1TB Ethernet Disk RAID Network Attached...

Brand: LaCie Pages: 5

StorTrends 1312-P

Brand: American Megatrends Pages: 2

PLATINUM 1500 IR M5

Brand: MAXDATA Pages: 44

Brand: Emerson Pages: 23

DIXELL XWEB5000 PRO

Brand: Emerson Pages: 20

Brand: Emerson Pages: 18

Avocent ACS 6000

Brand: Emerson Pages: 93

Brand: Emerson Pages: 114

Centellis 2000 Shelf Release 3.0

Brand: Emerson Pages: 194

Brand: Emerson Pages: 222

Brand: Cisco Pages: 23

Brand: Cisco Pages: 75

Brand: Cisco Pages: 132

Brand: Cisco Pages: 58

UCS 6400 Series

Brand: Cisco Pages: 68

Smart Storage NSS322

Brand: Cisco Pages: 2

Lava DATATAP-IP

Brand: Lava Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands