background image

FusionServer 2288 V5 Server 
Technical White Paper 

5 Hardware Description 

 

2022-11-11 

39 

 

Port Type 

Indicator 

Description 

indicator 

 

Blinking green: Data is being 
transmitted. 

 

Steady green: The network port is 
properly connected. 

56 Gbit/s IB optical 
port 

Connection status 
indicator 

 

Off: No physical link is set up. 

 

Blinking green: The physical link is 
abnormal. 

 

Steady green: The physical link is 
normal. 

Data transmission 
status indicator 

 

Off: No logical link is set up. 

 

Blinking yellow: Data is being 
transmitted. 

 

Steady yellow: The logical link is 
normal but no data is being transmitted. 

 

5.7 I/O Expansion 

5.7.1 PCIe Cards   

PCIe cards provide ease of expandability and connection. 

 

The electrical ports provided by PCIe NICs cannot be connected to power over Ethernet 
(PoE) devices (such as a switch with PoE enabled). Connecting such an electrical port to 
a PoE device may cause link communication failure or even damage the NIC.   

 

Contact your local sales representative or use the 

Compatibility Checker

 to determine the 

components to be used. 

 

When IB cards are used to build an IB network, ensure that the IPoIB modes of the IB 
cards at both ends of the network are the same. For details, contact technical support. 

5.7.2 PCIe Slots   

PCIe Slots 

Figure 5-30

 

PCIe slots 

 

 

Summary of Contents for FusionServer 2288 V5























































































Reviews: