PANEL LAYOUT, INDICATORS & CONTROLS
Layout of single loop 16 zone fire panel (code entry version)
Layout of one to two loop 32 zone fire panel (code entry version)
10:59:03 24 Jun : Normal
FREDCO WAREHOUSING
10:59:03 24 Jun : Normal
FREDCO WAREHOUSING
LED Indicators
Liquid crystal display
Provides detailed information on the status of the fire alarm system, see pages 8-11
General Fire
Flashes red when there is a fire condition on any zone and goes steady red
when the alarm is silenced. Subsequent fire conditions will restart the General
Fire LED flashing until it is silenced again
Fire Zones LEDs
One or more of these LEDs will flash red in an alarm condition (to show
(1-16 or 1-32)
which zone(s) the fire is in) and will go steady when silenced
Supply Present
Normally lit green to show that all of the panel’s power supplies are
functioning correctly
Test
Lit yellow when the panel is in walk test mode. This LED does NOT illuminate
for any other test condition
XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 6 of 28
XFP NETWORKABLE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
