XFit LEGEND User Manual Download Page 4

- 3 -

 

IMPORTANT SAFETY PRECAUTIONS   

 

1. Plug the power cord of the treadmill directly into a dedicated grounded circuit. This product must 
be grounded. If it has breakdown, grounding provides a path of least resistance for electric current 
to reduce the risk of electric shock. 

2. Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may 
interfere with proper ventilation. Do not place the treadmill near water or outdoors. 

3. Position treadmill so that the wall plug is visible and accessible. 

4. Never start the treadmill while you are standing on the walking belt. After turning the power on 
and adjusting the speed control there may be a pause before the walking belt begins to move, 
always stand on the foot rails on the sides of the frame until the belt is moving. 

5.  Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting 
clothing that may be caught in the treadmill. Always wear running or aerobic shoes with rubber 
soles. 

6.  Make  sure the  power supply is connected and  the  safety lock is  effective before using the 
treadmill. Fit one side of the safety lock on the treadmill and clip the other side on your clothes or 
belt, which will enable you to pull off the safety lock promptly in an emergency. 

7. Always unplug the power cord before remove the treadmill motor cover. 

8. Make sure there is no less than 2*1m space behind the treadmill. 

9. Keep small children away from the treadmill during operation. 

10. Always hold the handrails when initially walking or running on the treadmill, until you are 
comfortable with the use of the treadmill. 

10. Always attach the safety pull pin rope to your clothing when using the treadmill. If the treadmill 
should suddenly increase in speed due to an electronics failure or the speed being inadvertently 
increased,  the treadmill will come to a sudden stop when the pull pin is disengaged from the 
console. 

12. In case of any abnormality during the use process, please remove the safety lock immediately, 
grasping the handlebar and jumping onto the two edgings, then get off the treadmill after it stops.   

13. When the treadmill is not being used, the power cord should be unplugged, and the safety pull 
pin removed. 

14. Put the safety key away where cannot be reached by the children. Minors must be accompanied 
by the adults when using the treadmill. 

15. Before starting any exercise program, consult with your physician or health professional. He or 
she can help establish the exercise frequency, intensity (target heart zone) and time appropriate for 
your  age  and condition. If you have any pain or tightness in your chest, an irregular heartbeat, 
shortness of breath, feel faint or have any discomfort while you exercise, STOP! Consult your 
physician before continuing. 

 

 

Summary of Contents for LEGEND





























Reviews: