XFit LEGEND User Manual Download Page 15

- 14 -

 

F.  When the motor is running, press STOP to stop the motor. 

 

G.  Remove the safety lock to urgently stop motor running; then, LCD window will display “---” 

and the buzzer will make short sound of Bi-Bi-Bi. 

 

H.  When the set time reduces to zero or when the set calorie reduces to zero, or the set 

distance reduces to zero, the buzzer will make short alarm “Bi-Bi-Bi”, the speed window will 
display END; 5s later, the machine will return to the standby state and the buzzer will make 
long alarm “Bi-Bi”; 

 

I.  Parameters not set will increase forwards and will be reset after reaching the upper limit of 

the display range; in manual mode, the machine will stop when the time accumulates to be 
more than 99: 59 (100min). 

 

 

IV  Fixed program mode:   

 

1. 

The initial time is set to be 30min; only time can be set; setting range: 5:00- 99:00. Press SPEED 
+/ SPEED - or I/ INCLINE - to adjust the set value. 

 

2. 

Press START key, the motor will start running and the speed will gradually increase to the value 
for the first section of auto program (see details in the table of program parameters). 

 

3. 

Press SPEED +/ SPEED - to adjust speed. 

 

4. 

Press I/ INCLINE - to adjust the incline. 

 

5. 

Press speed shortcuts to quickly set up to the speed marked on the key. 

 

6. 

Press incline shortcut to quickly set up to the incline marked on the key. 

 

7. 

Each program is divided into 20 sections; operating time for each section will be 1/20 of the set 
time.

 

8. 

The buzzer will sound for three times when switching from one section to another. 

 

9.  When the set time reduces to zero, the speed will gradually reduce till the stop of the machine. 

The buzzer will make short alarm Bi-Bi-Bi; when the machine stops, the buzzer will make long 
alarm of Bi-Bi-Bi. The speed window will display END; 5s later, the machine will return to the 
standby state; then, the buzzer will make long-alarm of Bi-Bi.   

10. 

Remove the safety lock to urgently stop motor running; then, LCD window will display “---” and 
the buzzer will make short sound of Bi-Bi-Bi. 

 

Summary of Contents for LEGEND





























Reviews: