
- 20 -
LUBRICATION INSTRUCTIONS
WARNING!
Always unplug the power cord before performing any maintenance on your treadmill.
CLEANING
: Regular cleaning of your treadmill will extend its life.
WARNING!
To avoid electric shock, make sure the treadmill is off and the power cord is unplugged
before cleaning or maintenance.
AFTER EVERY EXERCISE:
Wipe the console and other surfaces of the treadmill with a clean, dry
soft cloth to remove excess sweat. DO NOT USE CHEMICALLY.
WEEKLY:
The use of a machine protective floor or mat is recommended for ease cleaning. The dirt
from the shoes comes in contact with the moving belt and eventually penetrates the bottom. The
use of a vacuum cleaner under the treadmill is recommended once a week.
MONTHLY:
put a broom under the treadmill to prevent dirt or trash from accumulating. Once a year,
you should remove the black cap of the motor and clean the dirt that may have accumulated in this
area.
WOODEN PLATFORM LUBRICATION:
Periodic lubrication control of the belt is recommended to
ensure the optimal performance of the treadmill. Every 1 month, or 20 - 40 hours of operation, lift
the ends of the drive belt and touch the top of the wooden platform as far as your hand can reach. If
you feel traces of silicone, you do not need lubrication. If you feel the wooden surface is dry, you
need lubrication. Ask your seller or call the technical department for the type of silicone.
HOW TO LUBRICATE PLATFORM
Caution:
Get the right product for lubricating the drive belt. Do not use grease or anti-rust liquid or
any other spray.
1.
Put the spray nozzle on the lubrication spray head.
2.
While lifting the drive belt on one side, place the spray nozzle between the drive belt and the
wooden platform about 10cm from the front of the treadmill. Apply the silicone spray to the wooden
platform, moving back and forth. Repeat for the other side of the drive belt. Spray for about 4
seconds on each side.
3.
Run the treadmill for 2 minutes at a speed of 5 km / h so that the silicone is spread over the entire
wooden surface and then you can use the treadmill normally.
WARNING:
Do not over-lubricate the wooden platform. Excess lubricant should be wiped with a
clean towel.
WARNING:
The friction of the platform with the treadmill plays an important role in the operation
and life of the treadmill and for this reason we recommend that you keep the treadmill clean and
frequently lubricate this point of friction to extend the life of the treadmill. If you do not follow the
above, the validity of the guarantee ceases.