ASSEMBLY INSTRUCTIONS
7
STEP 4
Insert the
PEDAL SHAFT(32)
through holes located on the
METER POST(31).
Place a
PEDAL SPACER(33)
and a
PEDAL(34)
onto each end of the
PEDAL SHAFT(32)
and slide them toward the
METER POST(31).
Then secure the
PEDALS(34)
with
BUTTON HEAD BOLTS(M8x1.25x15mm)(51)
and
LARGE WASHERS
(M8)(36)
at both ends of the
PEDAL SHAFT(32).
You need to use two Allen Wrenches to tighten the
BUTTON HEAD BOLTS(M8x1.25x15mm)(51)
at both ends of the
PEDAL SHAFT(32)
at the same time.
STEP 5
Remove the
LOCKING KNOBS(13)
from the
PIVOT CONNECTOR(10).
