HARDWARE IDENTIFICATION CHART
4
This chart is provided to help identify the fasteners used in the assembly process. Place the washers
or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale
to check the length of the bolts and screws.
3/16" 1/4" 5/16" 3/8"
1/2"
INCHES
0
1/2
1
1/2
2
1/2
3
1/2
4
1/2
5
1/2
6
in.
0
10 20
30 40
50 60
70 80
90 100
110
120
130
140
150
mm.
6
8
10
12
MILLIMETERS
NOTICE:
The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
Part No. and Description
Qty
49
Screw, Round Head (M5 x 0.8 x 12mm)
2
51
Bolt, Button Head (M8 x 1.25 x 15mm)
8
53
Bolt, Button Head (M8 x 1.25 x 25mm)
2
36
Large Washer (M8)
2
59
Washer (M8)
8
62
Nylon Nut (M8 x 1.25)
2
After unpacking the unit, open the hardware bag and make sure that you have all the following
fasteners. Some fasteners may be already attached to the parts.
length
length
