Xerox X2 User Manual Download Page 25

Page: 25 / 75

Operations

Operations panel menu (con’t)

Menu options

The top level menu consists of the following options:

Option

Description

SET

Sets printer options, such as media type, media attributes,
winding direction, language, etc.

TEST PRINT

Prints the nozzle test pattern for printer diagnostics.

HEAD MAINTENANCE

Carries out print head maintenance, such as purging and
wiping print heads.

ADJUSTMENT, AUTO

Sets the adjustment parameters for the printer.

REPLACING BLADE

Moves the cutter unit to the center position in order to replace
the cutter blade.

LIFE COUNTER

Provides feedback on usage, in feet/meters.

The

SET, REPLACING BLADE,

and

LIFE COUNTER

options are

described in this section.

HEAD MAINTENANCE

is addressed in the

Maintaining Print

Quality section.

TEST

PRINT

and

ADJUSTMENT,

AUTO

are addressed in Appendix A,

In Case of Difficulty

Summary of Contents for X2












































































Search results

Summary of Contents for X2

Reviews:

Related manuals for X2

Brands by name

Popular brands

Xerox X2, User Manual

Search results

Summary of Contents for X2

Reviews:

Related manuals for X2

Brands by name

Popular brands