Xerox X2 User Manual Download Page 23

Page: 23 / 75

Getting to Know Your ColorgrafX X2

Printer components (con’t)

Operations panel (con’t)

•

Button 1

, the top button on the right side of the

LCD provides the Menu button. Pressing the
Menu button shifts the printer to menu mode,
from which you can select printing options.

•

Button 2

the second button is used to

completely rewind the media. Current selected
media will be rewound automatically to the start
feed position.

•

Button 3,

the third button rewinds the media as

long as the button is pressed. Current selected
media will be rewound.

•

Button 4

, the fourth button moves the media

forward. Current selected media will be fed.

3. The

third display

, accessed using the left arrow

from the default display, has the following
functionality:

•

Button 1

, the top button on the right side of the

LCD. Button 1 provides the Menu button.
Pressing the Menu button shifts the printer to
menu mode, from which you can select printing
options.

•

Button 2

, the second button accesses the

head

maintenance

options.

Note: Head maintenance options can be
accessed from MENU mode as well.

•

Button 3,

the third button is used to

cut

the

media.

•

Button 4

, the fourth button has no functionality

directly from this display.

Note: By using the left and right arrow buttons,
the multiple menus at any level can be cyclically
accessed.

READY

HEAD MAINTENANCE

CUT

<MORE>

READY

RWD

ALL

RWD

<MORE>

FWD

Summary of Contents for X2












































































Search results

Summary of Contents for X2

Reviews:

Related manuals for X2

Brands by name

Popular brands

Xerox X2, User Manual

Search results

Summary of Contents for X2

Reviews:

Related manuals for X2

Brands by name

Popular brands