Xerox WorkCentrePro 123 System administration System Administration Manual Download

Page: 131 / 168

Scan using Template (Network Scanning) Setup

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide

131

If problems are encountered during machine setup, refer to the Problem Solving
chapter of the User Guide.

Scan using Template Environments

Network

The machine and the computer must be connected to a network and be able to
communicate using TCP/IP protocol.

Installation Procedure

To send the scanned document to a server using a template, configure the following
settings on the machine:

Network Communication Setup

By using the touch screen, activate the Internet Services (HTTP), FTP Client, or SMB
port to [Enabled].

Then, set the IP address.

Workstation Setup

This requires the workstation in the networking environment to be configured to
communicate with the machine.

Network Communication Setup

NOTE:

CentreWare Internet Services can also be used to configure the machine.

Refer to the CentreWare Internet Services chapter of the User Guide.

NOTE:

Keep the SNMP port enabled while you use the machine on the TCP/IP

network.

Initially, activate the port.

Connect the machine to the network.

Display the [System Settings] screen.

NOTE:

For more information about how to display the [System Settings] screen, refer

to the Setups chapter of the User Guide.

Select [Network Settings].

Select [Port Settings].

Kerberos Server IP or Name if Remote Authentication is required, likewise
DNS Server Address or Domain Name if Kerberos Server Name is used.

Customer

Item

Summary of Contents for WorkCentrePro 123 System administration









































































































































































Search results

Summary of Contents for WorkCentrePro 123 System administration

Reviews:

Related manuals for WorkCentrePro 123 System administration

Brands by name

Popular brands

Xerox WorkCentrePro 123 System administration, System Administration Manual

Search results

Summary of Contents for WorkCentrePro 123 System administration

Reviews:

Related manuals for WorkCentrePro 123 System administration

Brands by name

Popular brands