Xerox WorkCentre 7500 Series, System Administration Manual

Page: 18 / 195

Initial Setup
18 WorkCentre 7500 Series Multifunction Printer
System Administrator Guide
Disabling the Configuration Report at Startup
1. In CentreWare Internet Services, click
Properties
>
Services
.
2. Click
Printing
>
General
.
3. Under Configuration Report, clear
Print at Power on
.
4. Click
Apply
to save the new settings or
Undo
to retain the previous settings.
Manually Setting the Ethernet Interface Speed
The Ethernet interface on the printer automatically detects the speed of your network. Any auto-sensing
devices connected to the network, such as a hub, do not always detect the correct speed. Refer to the
configuration report to ensure that the printer detects the correct network speed.
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2. Touch
Network Settings
>
Advanced Settings
.
3. When the warning message appears, touch
Continue
.
4. Touch
Ethernet Physical Media
.
5. Select the speed to match the speed of your hub or switch.
6. Touch Save , then touch Close .
Assigning a Network Address
The printer automatically acquires a network address from a DHCP server by default. To assign a static IP
address, configure DNS server settings, or configure other TCP/IP settings, see IP on page 27.