Xerox WorkCentre 6655 System Administrator Manual Download Page 36

Page: 36 / 272

Network Connectivity

Xerox

WorkCentre

6655 Color Multifunction Printer

System Administrator Guide

Mopria

Mopria is a software feature that enables users to print from mobile devices without requiring a print

driver. You can use Mopria to print from your mobile device to Mopria-enabled printers.

Notes:

•

Mopria and all of its required protocols are enabled by default.

•

Only Mopria-enabled devices support Mopria printing.

•

Wireless devices must join the same wireless network as the printer. A system administrator can

connect the printer by its wired network interface.

•

The device that submits the Mopria job must be on the same subnet as the printer. To allow

devices to print from different subnets, configure your network to pass multicast DNS traffic

across subnets.

•

The name and location of your printer appears in a list of Mopria-enabled printers on

connected devices.

To configure Mopria:
1.

In CentreWare Internet Services, click

Properties

Connectivity

Setup

For Mopria Discovery, click

Edit

Configure protocols as needed. To configure a protocol, click

Edit

For Mopria Discovery, select

Enabled

Click

Save

Summary of Contents for WorkCentre 6655

















































































































































































































































































Search results

Summary of Contents for WorkCentre 6655

Reviews:

Related manuals for WorkCentre 6655

Brands by name

Popular brands

Xerox WorkCentre 6655, System Administrator Manual

Search results

Summary of Contents for WorkCentre 6655

Reviews:

Related manuals for WorkCentre 6655

Brands by name

Popular brands