Security
Xerox
®
WorkCentre
®
6655 Color Multifunction Printer 101
System Administrator Guide
Managing Protocol Groups
Protocol Groups are logical groupings of selected protocols based on service type, service name, port
number, and device type. Create a Protocol Group to apply specific security policies for selected
protocols.
Creating a New Protocol Group
1.
Click
Protocol Groups
at the top of the IPsec page.
2.
Click
Add New Protocol Group
.
3.
Type a Name and a Description for the group.
4.
Under Service Name, select the protocols that you want to add to the group.
5.
To control a service that is not listed, under Custom Protocols type a name for the service and select
the check box under Service Name.
6.
To control a service that is not listed, under Custom Protocols type a name for the service and select
the check box under Service Name.
7.
Select
TCP
or
UDP
from the Protocol list.
8.
Type the port number, and specify if the printer is the server or client.
9.
Click
Save
to apply the new settings or
Undo
to retain the previous settings. Click
Cancel
to return
to the previous page.
Editing or Deleting a Protocol Group
To edit or delete a protocol group, select the protocol group from the list, and click
Edit
or
Delete
.
Creating a New Action
1.
Click
Actions
at the top of the IPsec page.
2.
Click
Add New Action
.
3.
On the Step 1 of 2 page, under IP Action Details, type in the Name. This field is required.
4.
In the Description field, type a description for the action, if desired.
5.
Under Keying Method, select
Manual Keying
or
Internet Key Exchange (IKE)
.
Note:
Select Manual Keying if client devices are not configured for or do not support IKE.
6.
If you selected IKE, under Pre-shared Key Passphrase, type the passphrase, then click
Next
.
