General Procedures and Information
WorkCentre 3119
06/06
6-19
•
Cleaning Voltage (THV-)
- The (+) Transfer Voltage is not outputted because the THV PWM is controlled with high.
- The (-) Transfer Voltage is outputted because the THV-Enable Signal is controlled with
low
- The output fluctuation range is big because there is no Feedback control.
- Input Voltage : 24 V DC 15%
- Output Voltage : -1KV 15%
- Output Voltage Rising Time : 100 ms Max
- Output Voltage Falling Time : 100 ms Max
•
Developing Voltage (DEV)
- Input Voltage : 24 V DC 15%
- Output Voltage: -200V to -600V DC 3%
- Output Voltage Fluctuation range: PWM Control
- Input contrast of the output stability degree : 3 % or less
Loading contrast : 3 % or less
- Output Voltage Rising Time : 50 ms Max
- Output Voltage Falling Time : 50 ms Max
- Output Loading range : 10M - 1000 M
- Output Control Signal (BIAS-PWM) : the CPU output is HV output when PWM is low.
•
Supply
- Output Voltage : -400 V to -800V DC 5%(ZENER using, DEV )
- Input contrast of the output stability degree : under 3 %
Loading contrast : 5 % or less
- Output Voltage Rising Time: 50 ms Max
- Output Voltage Falling Time: 50 ms Max
- Output Loading Range: 10 M - 1000 M
- Output Control Signal (BIAS-PWM): the CPU is HV output when PWM is low.
3. SMPS (Switching Mode Power Supply)
•
AC Input
- Input Rated Voltage: AC 220V - 240V AC 110V - 127V
- Input Voltage fluctuating Range: AC 198V - 264V AC 99V - 135V
- Rated Frequency: 50/60 Hz
- Frequency Fluctuating Range: 47 - 63 Hz
- Input Current: Under 5.0Arms / 2.5Arms (But, the status when lamp is off or rated voltage
is inputted/outputted )
•
Rated Output Power
Table 1:
No
Item
CH1
CH2
CH3
Remark
1
Channel Name
+5V
+24V
+24.0VS
2
Connector Pin
CON2
5V Pin 3,4,24
GND Pin 5,6
CON2
24V Pin 13
GND Pin 7,9,10
CON2
24VS PIN 11, 12
GND Pin 7,9,10
3
Rated Output
+5V +/-5%
(4.75-5.25V)
+24V+/-15%
(21.6-27.6)
+24V+/-15%
(21.6-27.6)
4
Max. Current Output
1.0A
0.5A
1.0A
Summary of Contents for WorkCentre 3119
