Xerox WorkCentre 3119, User Manual

Page: 42 / 86

Troubleshooting
9. 6
The
machine
selects
print
materials
from the
wrong
paper
source.
The paper
source selection
in the printer
properties may
be incorrect.
For many software applications, the paper
source selection is found under the Paper
tab within the printer properties. Select
the correct paper source. See the
Software Section .
A print job
is
extremely
slow.
The job may be
very complex.
Reduce the complexity of the page or try
adjusting the print quality settings.
The maximum print speed of your
machine is 19 PPM for Letter-sized paper
and 18 PPM for A4-sized paper.
If you are using
Windows 98/Me,
the Spooling
Setting may be
set incorrectly.
From the Start menu, choose Settings
and Printers . Right-click the Xerox
Workcentre 3119 Series machine
icon, choose Properties , click the
Details tab, and then choose the Spool
Settings button. Select the desired spool
setting.
Half the
page is
blank.
The page
orientation
setting may be
incorrect.
Change the page orientation in your
application. See the Software Section .
The paper size
and the paper
size settings do
not match.
Ensure that the paper size in the printer
driver settings matches the paper in the
paper input tray.
Or, ensure that the paper size in the
printer driver settings matches the paper
selection in the software application
settings you use.
The
machine
prints, but
the text is
wrong,
garbled, or
incomplete.
The printer
cable is loose or
defective.
Disconnect the printer cable and
reconnect. Try a print job that you have
already printed successfully. If possible,
attach the cable and the machine to
another computer and try a print job that
you know works. Finally, try a new printer
cable.
The wrong
printer driver
was selected.
Check the application’s printer selection
menu to ensure that your machine is
selected.
The software
application is
malfunctioning.
Try printing a job from another
application.
The operating
system is
malfunctioning.
Exit Windows and reboot the computer.
Turn the machine off and then back on
again.
Condition Possible cause Suggested solutions
Pages
print, but
are blank.
The toner
cartridge is
defective or out
of toner.
Redistribute the toner, if necessary. See
page 8.3.
If necessary, replace the toner cartridge.
The file may
have blank
pages.
Check the file to ensure that it does not
contain blank pages.
Some parts,
such as the
controller or the
board, may be
defective.
Contact a service representative.
The
illustrations
print
incorrectly
in Adobe
Illustrator.
The setting in
the software
application is
wrong.
Select Download as Bit Image in the
TrueType Options window of the
Graphic properties and print the document
again.
An error
occurs
repeatedly
when you
are printing
with the
USB
connection.
When the USB
mode is set to
Fast , some PC
users may
experience poor
USB
communication.
Change the USB mode to Slow . To do so,
follow these step:
1 Press button until Machine
Setup appears on the top line of the
display.
2 Press the scroll button ( or ) until
USB mode appears and press
button.
3 Press the scroll button ( or ) until
Slow appears and press
button.
4 Press button to return to
standby mode.
Condition Possible cause Suggested solutions