Xerox Wide Format 6604, User Manual, Page: 72 / 208

This feature allows you to set variable scan widths from 4.0 to 36 inches, in increments
of 0.1 inch. Variable Width detects the image from aligning the original document
to the left registration mark.
1. Press the Services button on the Control Panel.
The Services menu will display with Copy as an option.
2. Select Copy.
The Copy screen will display.
3. Select the Advanced Settings tab.
4. Select Scan Width.
5. Select Variable Width when scanning a non-standard width original.
6. Then enter the desired scan width using either the numbers keypad or the scroll
buttons.
7. Select Save when finished.
Scan Offset
When the Scan Offset feature is enabled, and a scan offset position is defined, the
machine will ignore image information from the lead edge to the scan offset position.
This enables you to eliminate unnecessary detail from the lead edge of an original.
The scan offset position can be set up from 0 to 36.0 inches, in 0.1 inch increments.
The factory default is Disabled.
• Disabled: Scan offset will not be applied to the original
• Enabled: A scan offset equivalent to the dimension you specify will be applied to the
original when it is scanned.
1. Press the Services button on the Control Panel.
The Services menu will display with Copy as an option.
Xerox
®
Wide Format 6604/6605 Solution
™ 2-24
User Guide
Printing and Copying Documents