manualshive.com logo in svg

Xerox Wide Format 6604, User Manual, Page: 154 / 208

Share
Download
Xerox Wide Format 6604 User Manual Download Page 154

Refer System Administration, for all the details of the printer Administration tab features.

Select Machine Info on the Services menu.

The Machine Information screen displays the following fields of information.

• Linear Usage - The amount of media that has passed through the machine.

• Area Usage - The media used in square foot measurement.

• Control SW (Software Version) - The FreeFlow Accxes Print Server software version

displays.

• IP Address - The IP Address displays the IPv4 address. To access an IPv6 address, go

to  Machine Configuration  > Network Setup.

• Printer Status - online and offline

Media Status and Setup

The Media Status and Setup feature displays the media status as the amount of media
remaining, the installed media sizes and media types. Changing the setup for different
media is accomplished here.

Xerox

®

 Wide Format 6604/6605 Solution

™

6-2

User Guide

Machine Info

Summary of Contents for Wide Format 6604

















































































































































































































Reviews:

No comments