52
Chapter 2 Printing Setup
•
When [Image Area Only] check box is OFF.
Print data of a whole sheet is created. If the document is A3 size, the print data will
also be A3 size.
Zoom
Enlarges and reduces the image for printing.
•
When the [Zoom] check box has been set at ON:
Enables the enlargement and reduction rates to be entered.The image will be enlarged
or reduced in accordance with the specified value, regardless of the combined [Paper
Size] and [Output Paper Size] settings.
•
When the [Zoom] check box has been set at OFF:
Disables enlargement and reduction rate entry. The enlargement and reduction rates
automatically calculated from the [Paper Size] and [Output Size] settings appear in
gray.
Copies
Specifies the number of copies to be printed within a range of 1 to 99.
According to Printer
Settings
Transfer the generated data and output in accordance with the
logical printer setting.
•
[2up] and [4up] in [Multi-up] menu cannot be specified.
•
[Output Orientation] is automatically set to [Auto] when [Fit to Image Size] is
selected.
•
There is a possibility that the output length is shorter than the specified
synchronized length, because the data is clipped after generating the image.
•
When [Image Area Only] is specified to the blank page, blank print data is created
on the specified paper size.
•
When reduction/enlargement is specified with [Image Area Only], the data is
generated after reduction/enlargement process is completed.
The position of the margins and the clip point will differ depending on the
application in use.
Output Size
Output Result
